Settings; Navigation Settings - Blaupunkt BikePilot2 User Manual

Navigation system for bicycles
Table of Contents

Advertisement

11.2.3 Delete created waypoints
To delete a waypoint that you have created yourself, tap on Delete created waypoints.
One or several waypoints can be marked from the complete list and deleted by clicking on Ok.
Note: Imported waypoints can be deleted by deleting the corresponding GPX file in the GPX manager.

12. Settings

The settings for your device are subdivided into four categories.
The navigation settings relate to the routing, the map settings comprise all of the map functions, the
profiles / sensor settings relate to the set-up and all settings for the profiles and sensors and the system
/ general settings relate to the device or the application as a whole.

12.1 Navigation settings

Here you can make various settings relating to the routing. To do this, tap in the menu on Settings >
Navigation.
The following options can be changed:
12.1.1 Route options
The route options allow you to define your individual route.
The route options include two settings: the route optimisation and the type of routes. These settings
are run through as standard after each route calculation.
Route optimisation
With the route optimisation, you have various options for adapting the route:
Flat
- Prefers flat sections.
Mountainous
- Prefers hilly sections.
Short
- Calculates the shortest route to the destination, regardless of inclines.
Linear distance
Note: The selected route optimisation also has an impact on the length of the route. For example, flat sections
of the route with an incline that is too steep will be avoided, which can result in a longer route.
Types of route
With the types of route, you have the following options:
Cycle paths
- Uses or avoids cycle paths (only in bicycle mode).
Hiking trails
- Avoids or uses hiking trails (only in bicycle mode) / uses or prefers hiking trails (only in
pedestrian mode).
Steep gradient
– Avoids or uses roads (only in bicycle mode).
Roads
- Plots a straight line from your current location to the destination (bearing navigation).
– Avoids or uses gradients of over 8% (only in bicycle mode).
27

Advertisement

Table of Contents
loading

Table of Contents