Using The Traffic Congestion Function; Activating The Traffic Congestion Function - Blaupunkt TravelPilot DX-N Operating Instructions Manual

Route guidance

Using the traffic congestion function

Regardless of whether or not your TravelPilot DX-N is able to receive information
from a TMC source ("TMC D-Namic tuner box" or appropriately equipped Blaupunkt
car radio), you can enter a traffic congestion detour manually. As a result, you can
alter your route quickly on the basis of the traffic situation (e.g. road works, closed
sections of road, etc.). The TravelPilot DX-N will then calculate a new route to bypass
the traffic congestion. In order to do this, you must know the distance of the beginning
and the end of the traffic congestion from your current position.
You can also exclude entire roads from the route list.

Activating the traffic congestion function

1. To activate the traffic congestion function, press
while route guidance is in progress.
The "Congestion" menu will appear.
2. Mark . Press
OK
The "Congestion" menu for manual entries will appear.
3. Select "Congestion ahead". Press
A menu in which you can enter the beginning and the end of the traffic con-
gestion will appear.
4. Mark the distance at which the traffic congestion is due to begin, i.e. the dis-
tance from your current vehicle position.
Press on the remote control to set the arrow to the distance at which
the traffic congestion will begin. The distances available for selection will de-
pend on the course of the navigation route.
5. Mark the second distance. This value indicates how far the end of traffic con-
gestion is away from your current vehicle position.
Press to select the distance to the end of the traffic congestion.
6. Mark "Start". Press
OK
Route guidance will appear, you will hear the following voice output: "The
route is being calculated."
.
.
OK
.
on the remote control
!
32