Table of Contents
Advertisement
Programming Options
RF Programmer
The RF Programmer allows you to customize the system to fit the individual needs of the consumer, using
a handheld device capable of transmitting system settings directly to the system control module. The RF
Programmer is broken down into three different programming banks.
1. RF Programmer Bank- The system control module included with the CA-550 is known as a "Master
Module", which means that the control module is equipped with the ability to operate as one of
several different types of systems. The RF Programmer Bank allows you to set up the base
features of the system you are installing. It is very important to understand that the base features of
this system can only be programmed using the RF Programmer. Please refer to the chart below
showing factory default settings (bold) to determine what options need to be changed for your
system. When using the RF Programmer to select feature settings is very important to verify that the
correct base features remain at the default settings.
2. Feature Bank 1- Feature Bank 1 allows you to turn On/Off customer convenience features.
3. Feature Bank 2- Feature Bank 2 allows you to turn On/Off remote start features.
Manual Feature Programming
After installation is complete it will be necessary to program certain system characteristics that can't be
programmed using the RF Programmer (Shock Sensor settings and Tach Idle Speed). In addition all of
the customer convenience features and remote start features.
CA-550 RF Programmer Base Features
F
e
a
t
u
r
e
S
e
c
u
r
t i
y
R
e
m
o
t
e
S
t
a
1
W
a
/ y
2
W
a
y
D
e
f
a
S
e
t
i t
O
O
t r
1
W
a
T
X
u
t l
n
g
N
N
y
T
X
Advertisement
Table of Contents
