Furuno GP-7000F Operator's Manual page 88

9. DATA TRANSFER
4. When receiving data, follow steps shown below.
1) Choose NMEA 1 INPUT, NMEA 2 INPUT or RS232 3 INPUT appropriately,
and then push the [ENTER] knob.
2) Communication format between this unit and PC (or GP-7000/F) should be the
same.
5. Press the [CLEAR] key several times to close the window and menus.
6. Open the WAYPOINT LISTS.
SYM NAME
7. Rotate the [ENTER] knob to choose SEND or RECEIVE at the bottom of the
screen.
SEND: Sending all waypoints in the internal memory to external equipment.
RECEIVE: Receiving all waypoints to the internal memory from external equip-
ment.
8. Press the [ENTER] knob to execute.
When the sending is completed, the message "User Points sending." appears.
9. For receiving, do the operation for sending on the PC (or GP-7000/F).
When the receiving is completed, the message "Receiving completed" appears.
9-4
ICON FIND
MODE DELETE
Waypoint list
WAYPOINT LIST
LATITUDE
TYPE
LONGITUDE
LOCATE
SORT
DST [nm]
MODE
BRG [M]
EDIT NEW
SEND RECEIVE