Configure The Alarm Settings [Alarm Setup] - Panasonic WV-NS950 Setup Instructions

Configure the alarm settings [Alarm setup]

The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm
occurrence notification, and the VMD area settings can be configured on this page.
The "Alarm setup" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab.
The terminal alarms 1, 2, and 3 indicate the EXT I/Os 1, 2, and 3, respectively ( Installation Guide).
Configure the settings relating to the alarm [Alarm]
Click the [Alarm] tab on the "Alarm setup" page. ( pages 4 and 5: How to display/operate the setup menu)
I Alarm setup
The settings relating to the alarm can be configured in this section. Refer to pages 39, 41 and 42 for further informa-
tion about the settings relating to the camera action at an alarm occurrence, the alarm image and the alarm output
terminal.
[Terminal alarm 1]
Determine whether or not to use a terminal alarm 1 by
selecting "OFF", "Alarm input" or "Black & white input".
OFF: Does not use alarms.
Alarm input: Uses alarms.
Black & white input: Toggles between black & white
and color in accordance with input.
Note:
When an input is provided to the Black & white input
during patrol, the patrol action stops. If the patrol
action is continued, select "Patrol 1" in the [Self
return] box.
Default: OFF
[Terminal alarm 2]
Determine whether or not to use a terminal alarm 2 by
selecting "OFF", "Alarm input" or "Alarm output".
OFF: Does not use alarms.
Alarm input: Uses alarms.
38
Alarm output: Alarm output will be carried out accord-
ing to the settings for "Alarm output terminal setup"
( page 42).
Default: OFF
[Terminal alarm 3]
Determine whether or not to use a terminal alarm 3 by
selecting "OFF", "Alarm input" or "AUX output".
OFF: Does not use.
Alarm input: Uses alarms.
AUX output: The AUX buttons will be displayed on the
"Live" page.
Default: OFF
Note:
AUX is a camera terminal that allows users to oper-
ate (OPEN/CLOSE) at will from the "Live" page. For
example, an operator can remotely control lights in a
place where the camera is installed by connecting
the terminal to the light controller.
[VMD alarm]
Select "ON" or "OFF" to determine whether or not to
perform the alarm action using the VMD function. Refer
to page 43 for descriptions of how to set the VMD
areas.
Default: OFF
Important:
When the VMD alarm is set to "ON", the refresh
interval for MPEG-4 and JPEG (QVGA) images
becomes up to 15 fps.