Panasonic WV-NS950 Setup Instructions page 58

Configure the settings relating to the FTP periodic transmission [FTP]
Click the [FTP] tab on the "Network setup" page. ( pages 4 and 5: How to display/operate the setup menu)
I FTP periodic transmission
The settings relating to the periodic transmission of images to an FTP server can be configured in this section. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance.
( page 52)
Refer to page 59 for descriptions of how to configure schedules of image transmission.
Important:
• Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-
ed interval or period.
• When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, the FTP periodic
transmission function will become unavailable.
• When "ON" is selected for both the alarm image transmission function and the FTP periodic transmission func-
tion, the alarm image transmission function will be given priority over the FTP periodic transmission function. For
this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.
Note:
When "FTP error" is selected for "Save trigger" on the [SD memory card] tab, images that have failed to transmit
using the FTP periodic transmission can be saved automatically on the SD memory card. ( page 11)
[To FTP setup]
When "To FTP setup" is clicked, the [FTP] tab of the
"Server setup" page will be displayed. ( page 52)
[FTP periodic transmission]
Select "ON" or "OFF" to determine whether or not to
transmit images using the FTP periodic transmission
function.
When "ON" is selected, it is necessary to configure the
settings of the FTP server. ( page 52)
Default: OFF
58
[Directory]
Enter the directory name where the images are to be
saved.
For example, enter "/img" to designate the directory
"img" under the root directory of the FTP server.
Number of characters for the directory name: 1 - 256
characters
Default: None (blank)
[File name]
Enter the file name (name of the image file to be trans-
mitted) and select the naming option from the following.
With time and date: File name will be ["Entered file
name" + "Time and date (year/month/day/hour/
minute/second)" + "Serial number (starting from
00)"].
Without time and date: File name will be the charac-
ters entered for "File name" only. When "Without
time and date" is selected, the file will be overwritten
each time a file is newly transmitted.
Number of characters for the file name: 1 - 32 char-
acters
Default: None (blank)