Panasonic WV-NS950 Setup Instructions page 30

Configure the settings relating to the preset positions ("Preset No." setup menu)
Click the [SETUP>>] button of "Preset Position" on the [Image/Position] tab of the "Camera setup" page.
( page 25)
It is possible to register, edit and delete the preset positions on this page.
When the focus, brightness, zoom factor are adjusted, the adjustment will be applied immediately to the currently
displayed image on the [Image/Position] tab.
Depending on the environment (such as when the temperature is below 5 °C (41 °F), for example), the moving speed
of the camera to the preset position may become slower.
Register the preset position
Step 1
Move the camera to the position to be registered as a
preset position, and then select the desired preset posi-
tion number.
Step 2
Click the [SET] button.
→ The selected preset position number will be dis-
played next to "Position No.".
30
Step 3
To display the preset ID on the "Live" page, select "ON"
for "Preset ID" and enter the desired preset ID to be dis-
played. Then, click the [SET] button to apply the set-
tings.
Step 4
The settings of "Auto focus", "Dwell time", "Super
Dynamic 3" and "Mask area" can be configured for each
position independently.
Notes:
• When the displayed image is being zoomed in more
than x30, it is impossible to register the preset posi-
tions.
Decrement the zoom ration less than x30 and try to
register the preset positions again.
• It is impossible to register the preset positions during
the digital flip operation. When the [SET] button is
clicked, the camera will move and stop at the same
position with the panning/tilting operation. Then,
click the [SET] button again to register the preset
position.
Edit the settings of the registered preset
position
Step 1
Select the preset position number whose settings are to
be edited.
Step 2
Click the [GO] button.
Step 3
When the camera reached the preset position, do steps
3-4 of "Register the preset position".