Changing The Device Name Of Envaya Displayed On The Bluetooth Device - Denon envaya Owner's Manual

Contents Preparation
Changing the device name of
Envaya displayed on the Bluetooth
device
1
When the power is on, press and hold the Bluetooth
button and MUTE button simultaneously for
approximately 4 seconds.
A notification sound is heard and the status indicator blinks 3 times.
2
Press the volume adjustment button.
The device name changes as shown below each time the volume
adjustment button is pressed.
Button
Volume adjustment
button (+)
.
Volume adjustment
button (-)
.
Connections
The device name of Envaya
Envaya3
Envaya2
Envaya4
Envaya
Envaya4 Envaya3
Envaya Envaya2
Volume adjustment Troubleshooting
The status indicator blinks as shown below each time the device
name is switched.
The device name of Envaya
Envaya
Envaya2
Envaya3
Envaya4
z The notification sound beeps at the same time as the status indicator blinks.
NOTE
0 If you change envaya's Bluetooth device name, you must repair and
reconnect all of your Bluetooth devices using the selected name.
0 When the volume adjustment button is not operated for approximately 5
seconds, the selected device name is entered and Envaya restarts.
You cannot change to a different device name other than those listed above.
27
Appendix
Status Indicator
Blinks once
Blinks twice
Blinks three times
Blinks four times
Index