Get to Know Volume up Call answer Bluetooth ® /end button pairing button Power Volume down...
Page 3
Anruftaste Ein-/Aus-Schalter Lautstärke hoch Bluetooth -Taste Lautstärke runter ® Touche d’appel Alimentation Augmenter le volume Touche Bluetooth Diminuer le volume ® Pulsante di chiamata Accensione Volume su Pulsante Bluetooth Volume giù ® Botón de llamada Alimentación Subir volumen Botón de Bluetooth Bajar volumen ®...
Page 4
Charge Charge Open cap on the rear side. Connect the USB cable to the speaker and USB power adapter* via an AC outlet or computer. NOTE *USB power adapter not included. Rating of adapter should be less than DC 5 V, 2.4 A. Must be used with country specific approved adapter.
Page 5
Connect Power on. Activate Bluetooth settings on your mobile device. Select “Denon Envaya.” After you hear a 3 note tone, the indicator 12:00 Bluetooth light stops blinking and turns solid, you are connected. Bluetooth To connect an additional device, press the CHOOSE “Bluetooth button”, and activate Bluetooth...
Page 6
Talk + Siri Play* To answer and end calls, tap the “call answer/end button”.** To activate Siri Play, confirm that your iPhone is paired. Press and hold the “call answer/end button” for 3 or more seconds. Siri is automatically activated and your speaker will answer your voice commands.
Page 7
Envaya Link Once your mobile device is paired with the master speaker, power on the second speaker. Press and hold the “Bluetooth pairing button” on the master speaker and slave speaker simultaneously for 6 or more seconds. Once you hear a beep, the pairing of the two speakers is complete.