Trouble Shooting Guide; Appearance - Dimplex EWM-COPPER Parts & Service Manual

TROUBLE SHOOTING GUIDE

APPEARANCE

Problem
Probable Cause
Solution
Service Manual Reference
Problem
Probable Cause
Solution
Service Manual Reference
Problem
Probable Cause
Solution
Service Manual Reference
Problem
Probable Cause
Solution
Service Manual Reference
Problem
Probable Cause
Solution
Service Manual Reference
Flame frozen.
Loose wiring or defective flame motor.
Check all wiring for loose connections, repair/replace
as necessary. If wiring connections are suitable,
replace flame motor.
Page 9
Flame not bright, flame not visible.
Loose wiring or burnt light bulb(s).
Check all wiring for loose connections, repair/replace
as necessary. Check upper and lower light bulb(s).
Replace burnt bulbs with factory specified bulbs.
Page 7
Flame shudder.
Defective flame motor.
Replace flame motor with a new one.
Page 9
Log set dim, ember bed not glowing.
Loose wiring or burnt light bulb(s).
Check all wiring for loose connections, repair/replace
as necessary. Check upper and lower light bulb(s).
Replace burnt ones with factory specified bulbs.
Page 7
Fireplace does not turn on.
Defective main power on/off switch or loose wiring.
Check all wiring for loose wiring connections,
repair/replace as necessary. If all wiring connections
are suitable check the main on/off switch for proper
operation. Replace switch as necessary.
Page 8
17