BF5000NT, BF5000, EF2604, SF2603, DF2603 OPERATION This section will explain the function of each convent control. To access the controls, open the upper grill by pulling near the top, forward and down. A. MAIN ON/OFF SWITCH The on/off switch supplies power to all fireplace functions (heater & flame).
BF5000NT, BF5000, EF2604, SF2603, DF2603 REMOTE CONTROL INSTRUCTIONS (Optional Accessory) 1. Plug firebox into the outlet located on the side of the receiver. 2. Plug receiver into the wall outlet. 3. Install a 9 volt battery into the transmitter. 4. Turn the firebox main power switch to the on position prior to using the remote control.
BF5000NT, BF5000, EF2604, SF2603, DF2603 LIGHT BULB REPLACEMENT Light bulbs need to be replaced when you notice a dark section in the flame or when the clarity and detail of the log exterior disappears. There are two bulbs at the top of the opening that illuminates the log set exterior and four bulbs under the log set which generate the flames and embers.
BF5000NT, BF5000, EF2604, SF2603, DF2603 LOWER BULB REPLACEMENT 1. Remove the trim by pulling straight forward. 2. Hold the glass in place while removing the retaining clip from the upper center of the firebox. 3. Lift glass out and store in a safe place.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
Page 14
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
BF5000NT, BF5000, EF2604, SF2603, DF2603 If the fireplace was operating prior to servicing allow at least 10 minutes for light bulbs and heating element to cool off to avoid accidental burning of skin. Disconnect power before attempting any maintenance or cleaning to reduce the risk of electric shock or damage to persons.
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fireplace. 2.
FOR BATHROOM USE Must be protected by a GFI receptacle or circuit if receptacle is used it must be readily accessible. To prevent electrical shock this unit is an electrical appliance that is not watertight and must be installed as to prevent water from entering unit. This must be installed away from showers, tubs, etc.
Dimplex fireplace surrounds (mantels) and trims covered by this limited warranty have been tested and inspected prior to shipment and, subject to the provisions of this warranty, Dimplex warrants such products to be free from defects in material and workmanship for a period of 1 year from the date of first purchase of such products.
Page 32
Dimplex will in its sole discretion either repair or replace such defective product or part without charge. If Dimplex is unable to repair or replace such product or part, or if repair or replacement is not commercially practicable or cannot be timely made, Dimplex may, in lieu of repair or replacement, choose to refund the purchase price for such product or part.
Page 33
What Dimplex and its dealers and service agents are also not responsible for: IN NO EVENT WILL DIMPLEX, OR ITS DIRECTORS, OFFICERS, OR AGENTS, BE LIABLE TO THE PURCHASER OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY,...