Yamaha RS90PB Owner's Manual page 85

3. Remove the shroud and the right side
cover (RS90P / RS90PLT / RST90PGT),
or open the shroud (RST90). [See page
63 (RS90P / RS90PLT / RST90PGT) or
page 67 (RST90) for the procedures.]
4. Disconnect the oil level gauge coupler.
NOTICE: Disconnect the oil level
gauge coupler before removing the oil
filler cap, otherwise the cable could
twist and break.
RS90P / RS90PLT / RST90PGT
1
1. Oil level gauge coupler
2. Oil filler cap
RST90
1. Oil level gauge coupler
2. Oil filler cap
5. Remove the oil filler cap, wipe the dipstick
clean, insert it back into the oil filler hole
(without screwing it in), and then remove
it again to check the oil level.
Periodic maintenance and adjustment
[ECS00452]
2
1. Oil filler cap
2. Dipstick
TIP
The engine oil should be between the "H" and
"L" level marks on the dipstick.
RS90P / RS90PLT / RST90PGT
1. "H" level mark
2. "L" level mark
RST90
1. "H" level mark
2. "L" level mark
79