Operation Instructions - Hunter ceiling fan Instructions Manual

Light Kit (continued)
Install a bulb into each of the
sockets. When necessary, replace
with bulbs of the same wattage.
Metal
Plate
Globe
Globe
Keeper
Finial
Cap
Finial
Press the globe and globe keeper
flush against the metal plate. Thread
the light pull chain through the hole
in the center of the finial cap and
thread the fan pull chain through the
hole in the side of the cap. Finally,
thread only the light pull chain
through the hole in the finial and
screw the finial onto the threaded rod.
M0097-01 • 04/14/14 • © Hunter Fan Company
Fan
Pull
Light
Pull Chain
Chain
Connect the appropriate pull
chain pendant to each of the short
chains coming from the finial
and finial cap. The fan pull chain
controls the speed: from high to
off. The light pull chain controls
the light fixture: on and off.
13
www.HunterFan.com
1.888.830.1326
See next page for remote

operation instructions.