Axis 560 User Manual page 38

Section 3: Basic Installation
38
AXIS 660 Token Ring Print Servers:
Type the following commands in the shell window:
arp -s 802.5 <host name> <node address> temp
ping <host name>
The node address is either the serial number found on the
underside label of the AXIS 660 or a Locally Administrated
Address.
Example:
arp -s 802.5 npsname 00:02:31:48:00:61 temp
ping npsname
The host will return
indicates that the address has been set and that communication is
established.
If the host name has not been mapped to an IP address, simply
Notes:
replace the host name entry with the IP address in the example
above.
The ARP command varies between different UNIX systems.
Some BSD type systems expect the host name and node address in
reverse order.
When you execute the
experience a significantly longer response time than is usual.
AXIS 560/660 User's Manual
npsname is alive,
command for the first time, you may
ping
or a similar message. This