Custom Name; Call Timer; Vibrate - Aastra 6757i CT User Manual

Custom Name

Custom name allows the user to personalize the name/label for the cordless handset. In a
multi-handset environment, this is an ideal option to personalize each handset to its user or
extension number.
1. Press Â.
2. Navigate to Custom Name or press 4.
3. Press the Change softkey.
4. Press the Edit softkey. If a custom name already exists, the Delete softkey is presented.
5. Using the keypad, type out a new label or use the scroll keys  and Ï to move the cursor
to the desired display position or to erase text.
6. The ChCase softkey is available to toggle between upper and lower case text entry.
7. Press the Save softkey to save the name.
8. Press the Goodbye

Call timer

When the call timer is enabled, the timer starts from the first call and continues until all calls
have been released.

Vibrate

The Vibrate option allows the handset to signal an incoming call by vibrating as well as ringing.
By default, this option is always Off.
To enable this feature, press the Change softkey. The display indicates "Vibrate On" and
•
"-confirmed-" and quickly returns to the previous menu display.
Once the Vibrate is On, p icon is shown beside the ringer icon on the top right line of the
•
display.
• Pressing the
214
Handset UI
y
key to return to the main idle screen.
Note:
In editing mode, the Volume Bar can be used in place of the
to control the screen cursor. Pressing the Lower end volume bar for Backspace/
Erase; and pressing the Higher end volume bar to add a Space.
Note:
The call timer is not usable for call accounting since the timer continues to
increment even when the call is on hold.
Handset UI
y
key returns you to the main idle display screen.
 Ï
and
Model 6757i CT IP Phone User Guide
keys