Flash Key - Aastra 6757i CT User Manual

Flash Key

You can set a key to generate a flash event when it is pressed on the 6757i CT. You do this by
setting the key to "flash". The IP phone generates flash events only when a call is connected and
there is an active RTP stream (for example, when the call is not on hold).
Configuring a Flash Key
Aastra Web UI
Use the following procedure to configure a Flash key on the 6757i CT IP Phone. The procedure
shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select "Flash".
4. In the "Label" field, enter a label to display on the phone for the key.
Model 6757i CT IP Phone User Guide 109