Status Scroll Delay - Aastra 6757i CT User Manual

2. The "Call Hold Reminder" field is disabled by default. To enabled this field, check the
box.
When this feature is enabled, the reminder ring splash timer starts as soon as you put a call
on hold (even when no other calls are active on the phone).The phone initiates a reminder
ring splash periodically for the single call on hold. When disabled, no reminder ring splash
is audible.
3. Click Save Settings.

Status Scroll Delay

Using the Aastra Web UI, you can specify a scroll delay option that allows you to set the time
delay, in seconds, between the scrolling of each status message on the phone. You can specify
this setting in the "Status Scroll Delay (seconds)" field at the path Basic
Settings->Preferences->General. The default time is 5 seconds for each message to display
before scrolling to the next message. You can increase or decrease this time as required. Setting
and saving the value in the Aastra Web UI applies to the phone immediately.
Configuring Status Scroll Delay
Aastra Web UI
Use the following procedures to specify a status scroll delay on the IP phone.
1. Click on Basic Settings->Preferences->General.
2. Enter a value in the "Status Scroll Delay (seconds)" field. Valid values are: 1 to 25 seconds.
Default is 5 seconds.
3. Click Save Settings.
250 Model 6757i CT IP Phone User Guide