Empty Key - Aastra 6757i CT User Manual

Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this
by setting the softkey to "empty". The keys are added in order (from key 1 to key 20) after any
hard-coded keys have been added. If a particular key is not defined, it is ignored.
Configuring an Empty Key
Aastra Web UI
Use the following procedure to configure an Empty softkey on the 6757i CT phone.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 10" on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select Empty.
4. (Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want
to apply to this softkey.
Model 6757i CT IP Phone User Guide 145