Call Waiting Tone Period - Aastra 6757i CT User Manual

Call Waiting Tone Period

You can specify a specific time period (in seconds) for the call waiting tone to play at regular
intervals on an active call using the parameter "Call Waiting Tone Period". A value of "0" is
the default and plays the call waiting tone only once on the active call. When the incoming caller
hangs up, the call waiting tone stops on the existing active call.
You can enable or disable this feature in the Aastra Web UI.
Configuring "Call Waiting Tone Period"
Use the following procedure to configure "Call Waiting Tone Period".
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. In the "Call Waiting Tone Period" field, enter a time period, in seconds, that the call
waiting tone will be audible on an active call when another call comes in. Default is 0
seconds.
3. When enabled, the call waiting tone plays at regular intervals for the amount of time set for
this parameter. For example, if set to "30" the call waiting tone plays every 30 seconds.
When set to "0", the call waiting tone is audible only once on the active call.
4. Click Save Settings.
244 Model 6757i CT IP Phone User Guide