Chapter 4: Maintenance And Troubleshooting; Introduction; What Maintenance Can I Do; How Do I Troubleshoot The Ray240 - Raymarine Ray240 User Manual

With digital selective calling

Hide thumbs Also See for Ray240:

Table of Contents

81219_4.book Page 53 Tuesday, June 27, 2006 1:07 PM

Chapter 4: Maintenance and

Cleaning

Do not use solvents or other chemicals to clean this equipment.

The Ray240 is designed to provide long-term operation. It is recognized, however

that environmental and other factors may result in the need for occasional

service.

The Ray240 has no user serviceable parts or adjustments. Never remove the cover

or attempt to service the product.

Your attention to a few basic points should ensure many years of service:

• Although the unit is waterproof, keep it as dry as possible.

• If you remove the handset, always fit the dust cap to the extension cable con-

nector.

• Clean the exterior of the unit with a tissue or soft non-abrasive cloth.

• Regularly inspect the radio case and antenna for any physical damage.

All Raymarine products are, prior to packing and shipping, subjected to

comprehensive test and quality assurance programs. However, if your Ray240

should develop a fault, please refer to the following table to identify the most

likely cause and the suggested action required to return the radio to normal

operation.

If you still have a problem after referring to the table below, contact your local

Raymarine dealer, national distributor or Raymarine Technical Services

Department for further advice.

Always quote the product serial number, which you will find printed on the unit.

Troubleshooting

CAUTION

Table of Contents