Scan The Channels; Use The Memory; Change The Transmitting Power - Raymarine Ray240 User Manual

81219_4.book Page 20 Tuesday, June 27, 2006 1:07 PM
20
How do I

....scan the channels?

....use the Memory?

MEMORY

....change the transmitting power?

1/25
Non-priority scanning
PRESS this button for non-priority scanning.
The radio will scan the channels in sequence for activity, automatically
tuning to a channel if activity is detected.
Priority scanning
PRESS and HOLD this button to start priority scanning.
The radio scans the priority channel in between scanning each channel in
sequence. If activity is detected on a channel the radio automatically
tunes to that channel.
Scan a channel list
PRESS this button with a memorized channel list operative and only
those channels contained in the list will be scanned.
In both scan modes, removing the handset from the cradle halts the
mode. You can transmit on the active channel. When the handset is
replaced in the cradle the selected scan mode is resumed.
Create a channel list
To create a channel list, select the first channel required, PRESS and hold
this button.
PRESS and hold again to remove a channel from the list.
Use a channel list
When you have created a channel list, PRESS this button, you can now
select channels from your channel list.
PRESS this button to change the transmitting power of the radio from
1Watt (Low) to 25 Watt (High) and vice versa.