Ricoh Infotec 4151 Operating Instructions Manual page 36

Using the Control Panel
Menu
Bypass Paper Size
4
❖ ❖ ❖ ❖ Duplex
Menu
Duplex
❖ ❖ ❖ ❖ Print Quality
Menu
Edge Smoothing
28
Description
You can specify the paper size, standard or custom, for the Bypass
Tray.
When the bypass paper size is not specified, the paper size you set
on the control panel is used.
If you use PCL 6 or PS2 printer driver to print custom paper size,
the paper size you set in the printer driver is used.
If you use PCL 5e printer driver to print custom paper size, paper
size you set on the control panel is used.
If the Bypass Tray can hold paper of either the short-edge-feed
size or the long-edge-feed size, use the short-edge-feed size.
If you want to use a long-edge-feed size in the Bypass Tray, the
printer driver and control panel settings must be the same.
Description
You can select whether you want to print on both sides of each
page.
• Off
• Long Edge Binding
• Short Edge Binding
Note
❒ Default: Off
❒ This menu appears only when the machine has duplex func-
tion. Confirm which type of machine you have.
❒ The setting in the printer driver takes priority of the setting on
control panel.
Description
You can set whether to enable Edge Smoothing.
• On
• Off
Note
❒ Default: On
❒ If "Toner Saving" is "On", "EdgeSmoothing" is ignored even
if it is "On".
❒ The setting in the printer driver takes priority of the setting on
control panel.