indicator will be flashing which means the device is
negotiating with the Client in WPS mode.
LAN/WAN: Lighting up blue indicates the Ethernet
cable is well connected and flashing indicates it is
receiving or sending data packets.
1.4.2 Side Panel Show
WPS/RESRT: Wi-Fi Protection Setup button and system
reset button. Press it for 1 second, the WPS function will be
enabled and WPS indicator will flash. Keep pressing this
button for 7 seconds, the settings configured in this device
will be deleted and it will restore the settings to factory
default.
MODE: Press this button to change working modes and the
corresponding mode indicator will light up blue.
1.4.3 Rear Panel Show
Rear panel port description:(From R to L)
150Mbps Portable 3G Wireless Router User Guide
9