Tenda 3G622R+ User Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Wireless Router
  5. 3G622R+
  6. User manual

Tenda 3G622R+ User Manual

3g 300mbps wireless router
Hide thumbs Also See for 3G622R+:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Tenda 3G622R+

Summary of Contents for Tenda 3G622R+

  • Page 2: Copyright Statement

    Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.

  • Page 3: Table Of Contents

    CONTENTS CHAPTER 1 INTRODUCTION ......1 ......2 RODUCT EATURES ......4 ACKAGE ONTENTS LED I ..4 NDICATOR AND ESCRIPTION CHAPTER 2 HARDWARE INSTALLATION ..7 2.1 H ....7 OW TO NSTALL THE OUTER 2.2 N ....10 ETWORK PPLICATION CHAPTER 3 HOW TO LOGIN TO THE ROUTER 11...
  • Page 4 7.1 B ........40 ASIC ETTINGS 7.2 W ....43 IRELESS ECURITY ETTING 7.3 A ......51 DVANCED ETTINGS 7.4 WPS S ........53 ETTINGS 7.5 WDS S ........55 ETTINGS 7.6 W ....56 IRELESS CCESS ONTROL 7.7 C ......
  • Page 5 CHAPTER12 URL MONITOR......73 12.1 URL M ........73 ONITOR CHAPTER 13 SECURITY SETTINGS....75 13.1 C ...... 75 LIENT ILTER ETTINGS 13.2 URL F ......77 ILTER ETTINGS 13.3 MAC A ......79 DDRESS ILTER 13.4 P ....80 REVENT ETWORK TTACK...
  • Page 6 APPENDIX Ⅱ: TROUBLESHOOTING ..... 98 APPENDIXⅢ: COMPLIED 3G MODEM CARD LIST ............104...

  • Page 7: Chapter 1 Introduction

    3G 11N Wireless Router Chapter 1 Introduction Thank you for purchasing Tenda 3G622R+ 11N Wireless Router! 3G622R+ is a high speed 3G 11N Wireless Router, which complies with latest IEEE802.11n IEEE802.11b/g standards and provides up to 300Mbps wireless receiving and transmitting rate with its wireless transmitting distance 6 times farther than G-products.

  • Page 8: Product Features

    Then, the included “Setup Wizard” is developed by Tenda especially for less IT-savvy users to install the device within seconds. In a word, 3G622R+ is your premier choice to share the Internet via 3G, wireless broadband, and wired broadband access ways.
  • Page 9 3G 11N Wireless Router Ethernet WAN port Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports Provides one USB 2.0 port for 3G modem card connection Supports xDSL/Cable MODEM, static and dynamic IP in community networking Supports remote/local Web management Supports WMM to better smooth your voice and video Supports wireless...

  • Page 10: Package Contents

    One Quick Installation Guide One Power Adapter One CD-ROM If any of the listed items are missing or damaged, please contact the Tenda reseller from whom you purchased for replacement immediately. LED Indicator and Port Description Front Panel and LED Indicator Show...
  • Page 11 3G 11N Wireless Router POWER When turns green, Always ON indicates the power connects well. When blinking, it indicates the device is negotiating with client in WPS mode. When turns green, blinking indicates the system runs well. When turns green, Always ON indicates the USB port is connected well;...
  • Page 12 3G 11N Wireless Router Back Panel Show： Rear Panel：（From L to R） POWER The port is for power adapter connection. Please use the included power adapter. RESET The system reset button. Press this button for 7 seconds, the settings configured in this device will be deleted and it will restore the settings to the default one.

  • Page 13: Chapter 2 Hardware Installation

    3G 11N Wireless Router It is always connected with DSL Modem, Cable Modem, or direct Internet line provided by ISP to access the Internet. LAN (1, 2, 3, 4) 4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card. Wi-Fi Protected Setup button, Press it for 1 second, the WPS feature will be enabled and WPS indicator will be shown blinking.
  • Page 14 3G 11N Wireless Router 2. Please connect the LAN port of the Router to the network adapter of your computer with a cable. 3. Connection between the Router and Network A. If you have a 3G USB modem card, please connect it to the Router's USB port to share 3G network.
  • Page 15 3G 11N Wireless Router port with the Internet access line. C. If you are provided the wireless broadband by your ISP to access the Internet or you want to amplify wireless signals, please set the Router's wireless WAN feature. 4. Please insert the included CD-ROM into the CD-ROM drive.

  • Page 16: Network Application Plan

    3G 11N Wireless Router 2.2 Network Application Plan Usually Wireless LAN Network is deployed in a planned environment where each access point is located in a steady place with certain wireless coverage area for communication service. Generally speaking, it is in the center of the area to reduce “dead spot”.

  • Page 17: Chapter 3 How To Login To The Router

    3G 11N Wireless Router 3. Application Plan for Wireless Broadband Connection Chapter 3 How to Login to the Router The chapter mainly presents how to enter the Router’s Web page. After you have finished the hardware installation (Please refer to chapter2.), the following steps will assist you to set the network configurations for you computer.
  • Page 18 3G 11N Wireless Router Places” and select “Properties”.
  • Page 19 3G 11N Wireless Router 2. Right click “Local Area Network Connection” and select “Properties”. 3 ． Select “Internet Protocol (TCP/IP)” and click “Properties”.
  • Page 20 3G 11N Wireless Router 4．Select “Obtain an IP address automatically” or select “Use the following IP address (S)”. A. “Obtain an IP address automatically” as the following diagram: B. “Use the following IP address (S)” IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1...

  • Page 21: Login To The Router

    3G 11N Wireless Router Tip: If you are not sure of the DNS server address, we recommend you to select “Obtain an IP address automatically (O)” and “Obtain a DNS server address automatically”. 3.2 Login to the Router 1．To access the Router’s Web-based interface, launch a web browser such as Internet Explorer and enter the Router’s default IP address, http://192.168.0.1.
  • Page 22 3G 11N Wireless Router 3. If you enter the correct user name and password, the screen will be the next one.

  • Page 23: Chapter 4 Wan Medium Type

    3G 11N Wireless Router Chapter 4 WAN Medium Type 4.1 WAN Medium Type The Router provides three access medium types. If you are provided the 3G broadband by your ISP to access the Internet, you can connect the 3G USB modem card to the Router’s USB port and select 3G WAN to set the device.

  • Page 24: Chapter 5 Quick Setup Guide

    3G 11N Wireless Router Internet, please select this type. Wired WAN: In this type the WAN link line must be wired. Please connect the access line to the WAN port on the Router’s rear panel. The default type is wired WAN. Wireless WAN: If you are provided the wireless WAN to access the Internet or you want to amplify the wireless signals, you can use this type.
  • Page 25 3G 11N Wireless Router 5.1.1 3G Broadband Connection (via 3G WAN) If you have a 3G USB modem card and you want to share 3G signals and access the Internet, please select “3G WAN” in “WAN Medium” after you enter the Router’s Web-based interface.
  • Page 26 3G 11N Wireless Router Notice: After you have finished the settings and you still can’t access the Internet, please use the wired broadband to connect the Internet and visit our Website. You can search the Model No. of your 3G USB Modem card in the compatible products list to download the corresponding upgrading firmware.
  • Page 27 3G 11N Wireless Router After saving and rebooting the device, you will enter the Router’s Web-based interface again. Please click “Next” as the diagram below: The screen will show as the diagram below. The Router supports multiple access ways such as ADSL PPPOE Dial, Dynamic IP, static IP, etc.
  • Page 28 3G 11N Wireless Router ADSL Virtual Dial-up (via PPPoE) Enter the Account and Password provided by your ISP, and click “Next”. For example： Dynamic IP (via DHCP) If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not need to enter the information like other modes.
  • Page 29 3G 11N Wireless Router Click “Next” and “Apply” to finish the settings. Static IP In this screen, fill the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary DNS server fields and click “Next”. For example：...
  • Page 30 3G 11N Wireless Router Click “Apply” to complete the setup wizard. The Router will record the settings you made. To activate the settings, it is recommended to select “Reboot the Router” from “System Tool” of the left menu. It is rebooting now, please wait for a few minutes and DO NOT power off it.
  • Page 31 3G 11N Wireless Router 5.1.3 Wireless Broadband Connection (via Wireless WAN) If you are provided the wireless broadband by your ISP to access the Internet or you want to amplify wireless signals, please select “Wireless WAN” in “WAN Medium” page after you enter the Router’s setup page. Shown as the diagram below: Please enter the wireless SSID, MAC address, channel, security mode parameters provided by your Wi-Fi ISP.
  • Page 32 3G 11N Wireless Router you are not clear, please click” Auto Scan” to finish the settings. Select and save the settings, and you will enter the Router’s Web interface again after rebooting the Router. Then click “next” as the diagram show. The screen will show as the diagram below.
  • Page 33 3G 11N Wireless Router ADSL Virtual Dial-up (via PPPoE) This way is used when the Router is connected to the wireless modem or you want to amplify wireless signals and share the Internet with multiple computers. Enter the Account and Password provided by your ISP, and click “Next”.
  • Page 34 3G 11N Wireless Router access the Internet now. Generally speaking, the wireless signals are amplified and you can share the Internet with multiple computers. Notice: When you open the wireless WAN feature or when you have a wireless router before and you want to amplify wireless signals, please pay attention to the IP address the previous router distributed.
  • Page 35 3G 11N Wireless Router and Alternate DNS Server fields and click “Next”. For example： ISP provides the following TCP/IP parameters as follows： IP Address：192.168.1.2 Subnet Mask：255.255.255.0 Gateway：192.168.1.1 Primary DNS Server：210.21.196.6 Secondary DNS Server：211.5.88.88 You need to fill in the related parameters. Click “Save”...
  • Page 36 3G 11N Wireless Router After rebooting the Router, you can click the “Running Status” on the right menu to check the connection between the Router and ISP device. If the status information of the WAN port appears as the diagram show, it means you have finished the Router’s basic settings and you can surf on line now.
  • Page 37 3G 11N Wireless Router wireless signals in standard 2.4GHZ frequency range are used as the transmitting medium in wireless WAN connection type. When you use wireless WAN or 3G WAN, please make sure that the wireless network exists and the intensity and performance of wireless signals are OK.

  • Page 38: Chapter 6 Advanced Settings

    3G 11N Wireless Router function of the Router. Chapter 6 Advanced Settings 6.1 LAN Settings LAN Settings are for the basic TCP/IP parameters of LAN ports. MAC Address: The Router’s physical MAC address as seen on your local network is unchangeable. IP Address: The Router’s LAN IP addresses (not your PC’s IP address).

  • Page 39: Wan Settings

    3G 11N Wireless Router 6.2 WAN Settings After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you can modify and configure the settings in details. Virtual Dial-up（PPPoE） WAN Connection Mode: Show your current connection mode.
  • Page 40 3G 11N Wireless Router application software can not be open or enabled, you can have a try to change the MTU value as 1450, 1400, etc. Service Name: It is defined as a set of characteristics that applied to a PPPoE connection.
  • Page 41 3G 11N Wireless Router Static IP If your connection mode, static IP is chosen, you can modify the following addressing information. IP Address: Here enter the WAN IP address provided by your ISP. Subnet Mask: Enter the WAN Subnet Mask here.

  • Page 42: Network Settings

    3G 11N Wireless Router 3G WAN: Network settings 3G modem card type: choose the Model No. of your 3G USB modem card. PIN code: SIM card personal identification code. Enter them provided by your ISP. Access Point Name: Enter them provided by your ISP.
  • Page 43 3G 11N Wireless Router Password: PPP Authentication Password. Some ISPs need to enter this value. Internet connection option: There are four kinds of connection methods: connect automatically, connect manually, connect on demand and connect on fixed time. Please select one of them according to your needs.

  • Page 44: Mac Address Clone

    3G 11N Wireless Router If your ISP doesn’t offer you the related parameters, you do not need to enter them. After configuring the settings correctly, click “Apply” button and wait for 60 seconds. Then you can access the Internet. 6.3 MAC Address Clone This page is for the Router’s MAC address to WAN.
  • Page 45 3G 11N Wireless Router Internet service that translate domain names into IP addresses which are provided by your Internet Service Provider. Please consult your Internet Service Provider for details if you do not have them. DNS: Click the checkbox to enable the DNS server. The Router’s DHCP sever will answer the client’s requests and distribute DNS address.

  • Page 46: Chapter 7 Wireless Setting

    3G 11N Wireless Router Chapter 7 Wireless Setting 7.1 Basic Settings Enable Wireless: Check to enable the Router’s wireless features; uncheck to disable it. Network Mode ： Select one mode from the following. The default is 11b/g/n mode.
  • Page 47 3G 11N Wireless Router 11b mode： Allow the wireless client to connect with the device in 11b mode at the maximum speed of 11Mbps. 11g mode： Allow the 11g/11n-compliant client device to connect with the AP at the maximum speed of 54Mbps. 11b/g mode: Allow the 11b/g-compliant client device to connect with the AP with auto-negotiation speed, and 11n...
  • Page 48 3G 11N Wireless Router via wireless adapter, and configure PC1 and PC2 in the same segment. After the feature is enabled, two PCs can not communicate and share network resource each other, but they can communicate with wireless clients connected with AP2. This feature is to isolate the communication of wireless clients connected with the same SSID.

  • Page 49: Wireless Security Setting

    3G 11N Wireless Router Standard Channel：Specify the effective channel (from 1 to 13\Auto) of the wireless network. Extension Channel：To increase data throughput of wireless network, the extension channel range is used in 11n mode. Channel Bandwidth ： Select channel bandwidth to improve the wireless performance. When the network has 11b/g and 11n clients, you can select the 40M;...
  • Page 50 3G 11N Wireless Router WPA Algorithms：Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. Pass Phrase: Enter the encrypted characters with 8-63 ASCII characters. Key Renewal Interval ： Set the key’s renewal period. 7.2.2 WPA2- Personal WPA2 (Wi-Fi Protected Access version 2) provides higher security than WEP (Wireless Equivalent Privacy) (Wi-Fi Protected...
  • Page 51 3G 11N Wireless Router WPA Algorithms：Provides TKIP [Temporal Key Integrity Protocol], AES [Advanced Encryption Standard] or TKIP&AES mixed mode. Pass Phrase：Enter the encrypted characters with 8-63 ASCII characters. Key Renewal Interval ： Set the key’s renewal period. 7.2.3 Mixed WEP WEP (Wired Equivalent Privacy), a basic encryption method, usually encrypts wireless data using a series of digital keys (64 bits or 128 bits in length).
  • Page 52 3G 11N Wireless Router monitoring your transmissions or using your wireless resources. Select Mixed WEP to enter the following window: Select SSID ： Select the SSID (main SSID or minor SSID) to configure security setting from the drop-down menu. Security Mode：From the drop-down menu select the corresponding security encryption modes.
  • Page 53 3G 11N Wireless Router 7.2.4 WPA- Enterprise This security mode is used when a RADIUS server is connected to the device. Select “WPA-Enterprise” from the drop-down menu to enter the following window: WPA Algorithms：Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard].
  • Page 54 3G 11N Wireless Router port of the Radius server. The default is 1812. Shared Key ： Enter shared authentication server with 8~63 ASCII characters. Session Timeout ： The authentication interval period between the Router and authentication server. 7.2.5 WPA2-Enterprise This security mode is based on Radius authentication server and WPA2 encryption method.
  • Page 55 3G 11N Wireless Router WPA Algorithms：Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption Standard]. Key Renewal Interval ： Set the key’s renewal period. Radius Server Address：Enter the IP address of the Radius server. Radius Server port ： Enter the authentication port of the Radius server.
  • Page 56 3G 11N Wireless Router protocol message to pass. Select “802.1 x” from the drop-down menu to enter the following window: WEP：Click “Enable/Disable” to enable or disable the WEP algorithm. Radius Server Address：Enter the IP address of the Radius server. Radius Server Port ： Enter the authentication port of the Radius server.

  • Page 57: Advanced Settings

    3G 11N Wireless Router default is 3600s. Note: To improve security level, do not use too easy characters. If you are not familiar with these ten security modes, it is recommended to use “WPA-Personal” mode. Wireless Security Settings 802.11n only defines three standard encryption methods: Open-None (Disable), WPA-Personal-AES, PA2-Personal-AES.
  • Page 58 3G 11N Wireless Router BG protection Mode: Auto by default. It is for 11b/g wireless client to connect 11n wireless network smoothly in a complicated wireless area. Basic Data Rates: For different requirement, you can select one of the suitable Basic Data Rates. Here, default value is (1-2-5.5.-11Mbps…).

  • Page 59: Wps Settings

    3G 11N Wireless Router APSD Capable: It is used for auto power-saved service. The default is disabled. 7.4 WPS Settings WPS (Wi-Fi Protected Setting) can be easy and quick to establish the connection between the wireless network clients and the device through encrypted contents. The users only enter PIN code or press WPS button on the panel to configure it without selecting encryption method and secret keys by manual.
  • Page 60 3G 11N Wireless Router Configuration) and PIN code. PBC：Select the PBC or press the WPS button on the front panel of the device for about one second (Press the button for about one second and WPS indicator will be blinking for 2 minutes, which means the WPS is enabled.

  • Page 61: Wds Settings

    3G 11N Wireless Router deployed by WPS, generally WPA/WPA2-personal mode. WPS Encrypt Type：The encryption type used by WPS, generally AES/TKIP. WPS key ： The effective key generated by AP automatically. AP PIN（KEY）：The PIN code used by default. Reset OOB： When this button is pressed, the WPS client will be idle state, and WPS indicator will be turned off.

  • Page 62: Wireless Access Control

    3G 11N Wireless Router to establish the connection. Bridge Mode: You can wirelessly connect two or more wired networks via this mode. In this mode, you need to add the Wireless MAC address of the connecting device into the Router's AP MAC address table or select one from the scanning table.

  • Page 63: Connection Status

    3G 11N Wireless Router MAC Address Filter：Enable/disable MAC address filter. Select “off” to malfunction MAC address; “disable” to prevent the MAC addresses in the list from accessing the wireless network; “Allow” to allow the MAC address in the list to access the wireless network.

  • Page 64: Chapter 8: Dhcp Server

    3G 11N Wireless Router MAC Address：Shows current MAC addresses of the hosts connecting to the Router. Bandwidth：Shows current frequency bandwidth the wireless client used. Chapter 8: DHCP Server 8.1 DHCP Settings DHCP (Dynamic Host Control Protocol) is to assign an IP address to the computers on the LAN/private network.

  • Page 65: Dhcp List And Binding

    3G 11N Wireless Router DHCP Server: Activate checkbox enable DHCP server. IP Address Start/End: Enter the range of IP address pool for DHCP server distribution. Lease Time: The length of the IP address lease. For example： If the lease time is an hour, then DHCP server will reclaim the IP address each hour.
  • Page 66 3G 11N Wireless Router IP Address: Enter the IP address which needs to be bound. MAC Address: Enter the MAC address of the computer you want to assign the above IP address. Click “Add” to add the entry in the list. Hostname: The name of the computer which is added a new IP address.

  • Page 67: Chapter 9 Virtual Server

    3G 11N Wireless Router Chapter 9 Virtual Server 9.1 Single Port Forwarding The Router can be configured as a virtual server on behalf of local services behind the LAN port. The given remote requests will be re-directed to the local servers via the virtual server.
  • Page 68 3G 11N Wireless Router Internal Port: This is the port number of LAN computer set by the Router. The Internet traffic from the external port will forward to the internal port. For example：you can set the internal port NO.66 to act as the external port NO.21 for ftp service.

  • Page 69: Port Range Forwarding

    3G 11N Wireless Router NOTE: If you set the virtual server of the service port as 80, you must set the Web management port on Remote Web Management page to be any value except 80 such as 8080. Otherwise, there will be a conflict to disable the virtual server.
  • Page 70 3G 11N Wireless Router Start/End Port: Enter the start/end port number which ranges the External ports used to set the server or Internet applications. IP Address: Enter the IP address of the PC where you want to set the applications. Protocol: Select the protocol (TCP/UDP/Both) for the application.

  • Page 71: Alg Service Settings

    3G 11N Wireless Router 9.3 ALG Service Settings In the context of computer networking, an ALG or application layer gateway consists of a security component that augments a firewall or NAT employed in a computer network. It allows customized NAT traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control/data"...

  • Page 72: Dmz Settings

    3G 11N Wireless Router Usually allowing client applications to use dynamic ephemeral TCP/ UDP ports to communicate with the known ports used by the server applications, even though a firewall-configuration may allow only a limited number of known ports. In the absence of an ALG, either the ports would get blocked or the network administrator would need to explicitly open up a large number of ports in the firewall;...

  • Page 73: Upnp Settings

    3G 11N Wireless Router DMZ Host IP Address: The IP address of the computer you want to expose. Enable: Click the checkbox to enable the DMZ host. For example: Set the computer at the IP address of 192.168.0.10 in LAN as a DMZ Host to intercommunicate with another host on the Internet.

  • Page 74: Chapter 10 Traffic Control

    3G 11N Wireless Router Enable UPnP: Click the checkbox to enable the UPnP. Chapter 10 Traffic Control 10.1 Traffic Control Traffic control is used to limit communication speed in the LAN and WAN. Up to 20 entries can be supported with the capability for at most 254 PCs' speed control, including for IP address range configuration.
  • Page 75 3G 11N Wireless Router Enable Traffic Control: To enable or disable the internal IP bandwidth control. The default is disabled. Interface: To limit the uploading and downloading bandwidth in WAN port. Service: To select the controlled service type, such as HTTP service. IP Starting Address: The first IP address for traffic control.

  • Page 76: Traffic Statistics

    3G 11N Wireless Router Min. /Max. Traffic speed (KB/s), which can not exceed the WAN speed. Apply: To enable the current editing rule. If not, the rule will be disabled. Add: After edit the rule, click the “add to list” button to add the current rule to rule list.

  • Page 77: Chapter 11 3G Wan Traffic And Connection Timer

    3G 11N Wireless Router Downstream rate: the speed of downstream data per second (Kbyte/S). Sending packet: The PC’s packets sending from the PC. Sending byte: The byte (Mbyte) sending from the Receiving packet: The PC’s packets received from the Router. Receiving byte: The PC’s byte (Mbyte) received from the Router.

  • Page 78: Connection Timer

    3G 11N Wireless Router Notice: this function is only for 3G WAN. In 3G Router mode, 3G WAN traffic is used to calculate the traffics of WAN port. Click “3GWAN Traffic” then you can inquiry the status such as the status 11.2 Connection Timer In 3G WAN mode, Connection Timer function is supported.

  • Page 79: Chapter12 Url Monitor

    3G 11N Wireless Router Note: The result of 3G WAN Traffic and Connection Timer are only for reference. This device can only calculate the status that the 3G modem card plugs into the device. The actual statistics is subject to the ISP. Chapter12 URL Monitor 12.1 URL Monitor This feature is used to record user’s Internet activity, so...
  • Page 80 500 entries. Receive E-mail Address: Input the received E-mail’s address here. For example: tenda@sina.com.cn SMTP Server Address: Input the SMTP server address here. If you are not clear what your SMTP server’s address is, you can find them from Help page of the registered e-mail.

  • Page 81: Chapter 13 Security Settings

    3G 11N Wireless Router 1440 minutes. For example: if you input 30 here, it means the Router will send an email from “Send Email Address” to “Receive Email Address” in every 30 minutes. And then the device will clean all records and start the recording again.
  • Page 82 3G 11N Wireless Router Client Filter: Check to enable client filter. Access Policy: Select one number from the drop-down menu. Enable: Check to enable the access policy. Clear the Policy: Click “Clear” button to clear all settings for the policy. Filter Mode: Click one radio button to enable or disable to access the Internet.

  • Page 83: Url Filter Settings

    3G 11N Wireless Router from the drop-down menu. Times: Select the time range of client filter. Days: Select the day(s) to run the access policy. For example: If you don’t want the computer at the IP address of 192.168.0.100 to access the Internet from 9：00 to 18 ：...
  • Page 84 3G 11N Wireless Router URL Filter: Check to enable URL filter. Access Policy: Select one number from the drop-down menu. Enable: Check to enable the access policy. Clear the Policy: Click “Clear” button to clear all settings for the policy. Filter Mode: Click one radio button to enable or disable to access the Internet.

  • Page 85: Mac Address Filter

    3G 11N Wireless Router Days: Select the day(s) to run the access policy. Save: Select Save to enable the settings. For example: If you want the computer at the IP address of 192.168.0.123 to access the Internet from 9：00 to 18： 00 everyday and only can search the WEB pages contain the strings such as sina, sohu, and yahoo, you need to set the packet filtering list as the above diagram.

  • Page 86: Prevent Network Attack

    3G 11N Wireless Router MAC Address Filter: Check to enable MAC address filter. Access Policy: Select one number from the drop-down menu. Enable: Check to enable the access policy. Clear the Policy: Click “Clear” button to clear all settings for the policy. Filter Mode: Click one radio button to enable or disable to access the Internet.

  • Page 87: Remote Web Management

    3G 11N Wireless Router Prevent Network Attack: Check to enable it for attack prevention. 13.5 Remote Web Management This section is to allow the network administrator to manage the Router remotely. If you want to access the Router from outside the local network, please select the “Enable”.

  • Page 88: Local Web Management

    3G 11N Wireless Router Note： 1. If you want to login the device’s Web-based interface via port 8080, you need use the format of WAN IP address: port (for example http://219.134.32.101: 8080) to implement remote login. 2. If your WAN IP address starts and ends with 0.0.0.0, it means all hosts in WAN can implement remote Web management.

  • Page 89: Wan Ping

    3G 11N Wireless Router Enable: Check to enable the local web management. MAC Address: Enter the MAC addresses of LAN computers. Note：1. In the default state, this feature is not enabled. All computers in the LAN can login the Web. 2.

  • Page 90: Chapter 14 Routing Setting

    3G 11N Wireless Router Chapter 14 Routing Setting 14.1 Routing Table The main duty for a router is to look for a best path for every data frame, and transfer this data frame to a destination. So, it’s essential for the router to choose the best path, i.e.

  • Page 91: Chapter 15 System Tools

    3G 11N Wireless Router Subnet Mask: The network portion of the Destination LAN IP. Gateway: The gateway of the next hop, usually the Router or host’s IP address. Note： 1. The gateway must keep the same segment with the Router’s LAN IP address. 2.

  • Page 92: Ddns

    3G 11N Wireless Router Time Zone: Select your time zone from the drop-down menu. Customized time: Enter the time you customize. Note： When the Router is powered off, the time setting will be lost. Before the Router will obtain GMT time automatically, you need connect with the Internet and obtain the GMT time, or set the time on this page first.
  • Page 93 3G 11N Wireless Router Main Features: Owing to ISP most times provides dynamic IP address, DDNS is used to capture the changeable IP address and match the fixed domain. Then users can have access to the Internet to communicate with others. DDNS can help you establish virtual host in your home and company.

  • Page 94: Backup/Restore Settings

    Domain Name tenda.vicp.net After mapping the port in the virtual server, setting account information in DDNS server and in the address field entering http://tenda.3322.org, you can access the Web page. 15.3 Backup/Restore Settings The device provides backup/restore settings, so you need set a directory to keep these parameters.
  • Page 95 3G 11N Wireless Router Click “Save” to save the configuration files. Restore Setting： Click “Browse” button to select the backup files. Click “Restore” button to restore previous settings.

  • Page 96: Restore To Factory Default Setting

    3G 11N Wireless Router 15.4 Restore to Factory Default Setting This button is to reset all settings to the default values. It means the Router will lose all the settings you have set. So please Note down the related settings if necessary.

  • Page 97: Upgrade Firmware

    15.5 Upgrade Firmware The Router provides the firmware upgrade by clicking the “Upgrade” after browsing the firmware upgrade packet which you can download from www.tenda.cn. Browse: click this button to select the upgrade file. Upgrade: click this button to start the upgrading process.

  • Page 98: Password Change

    3G 11N Wireless Router 15.7 Password Change This section is to set a new user name and password to better secure your router and network. User Name: Enter a new user name for the device. Old Password: Enter the old password. New Password: Enter a new password.

  • Page 99: Logout

    3G 11N Wireless Router Refresh: Click this button to update the log. Clear: Click this button to clear the current shown log. 15.9 Logout After you have finished the settings completely, in logout page click “Yes” to logout the web management page.

  • Page 100: Appendix Ⅰ：glossary

    3G 11N Wireless Router Appendix Ⅰ：Glossary 3G, the 3rd Generation, refers to the third digital communication technology. It can manage multi-media such as image, audio, and video streams etc. and provide different communication services such as web browse, telephone session, and electronic business etc. CDMA2000 CDMA2000, also called CDMA Multi-Carrier, is one of the current three 3G standards in the world which was put...
  • Page 101 3G 11N Wireless Router Channel An instance of medium use for the purpose of passing protocol data units (PDUs) that used simultaneously, in the same volume of space, with other instances of medium use(on other channels) by other instances of the same physical layer (PHY),with an acceptably low frame error ratio(FER) due to mutual interference.
  • Page 102 3G 11N Wireless Router data. Therefore, all devices on a wireless network must use the same key and same type of encryption. There are 2 methods for entering the KEY; one is to enter a 16-bit HEX digit. Using this method, users must enter a 10-digit number (for 64-bit) or 26-digit number (for 128-bit) in the KEY field.
  • Page 103 3G 11N Wireless Router 802.1x Authentication Static WEP key is difficult to manage. When you change the key, you need to inform everyone. Once the key is disclosed, there is no security. In addition, since static WEP encryption has serious security holes, the WEP key can be decrypted by receiving multiple data.
  • Page 104 In this part some questions and problems shown during the Router’s usage and installation will be given suggesting answers. If your problems are not in the list, please log into our website www.tenda.cn or send an E-mail to support@tenda.cn, and we will reply you in the earliest time.
  • Page 105 3G 11N Wireless Router 2. Forget the login password and can not enter the setting page. What can I do? Press the “RESET” button for 7 seconds to restore the Router to default settings. 3. The computer connected with the Router shows IP address conflict.
  • Page 106 3G 11N Wireless Router address to the bind21ing PC’s MAC address. Select “MAC Address Clone” in “Advanced Setting” to input your computer’s MAC address and click “Apply” to activate it. 6. How to share my computer’s source with other users in Internet？ If you want Internet users to access the internal server via the Router such as e-mail server, Web, FTP, you can configure the “Virtual Server”...
  • Page 107 3G 11N Wireless Router application and service port: Server Protocol Service Port WEB Server FTP Server Telnet NetMeeting 1503、1720 File Send:6891-6900(TCP) TCP/UDP Messenger Voice:1863、6901(TCP) Voice:1863、5190(UDP) PPTP VPN 1723 Iphone5.0 22555 SMTP POP3 7. Why can’t I use my 3G Modem Card to connect the Internet? Please make sure that you have inserted a SIM card into your 3G Modem Card, you have enabled...
  • Page 108 3G 11N Wireless Router is compatible with the Router. You can search the related model No. on the compatible product list. Please make sure that the 3G modem card model selected in the 3G Web interface matches the practical product and the settings you entered match the parameters by your ISP.
  • Page 109 Internet, you can contact us for support. If you still have some problems, please contact our customer service or log on our website. Website: http://www.tenda.cn Technical Support Toll Free: 400-6622-666 (For Mainland China Only) Toll Free: 1-800-570-5892 (For USA only)
  • Page 110 3G 11N Wireless Router Skype: tendasz MSN: tendasz@hotmail.com Email: support@tenda.com.cn Headquarter Shenzhen: Add: Tenda Industrial Zone, No.34-1 Shilong Road, ShiyanTown, BaoanDistrict, Shenzhen,China. 518108 Tel:(86)755-27657180 Fax: (86)755-27657178 Email: sales@tenda.com.cn Technical Support: support@tenda.com.cn Appendix : Ⅲ Complied 3G Modem Card List Model...
  • Page 111 3G 11N Wireless Router HUAWEI E176G Vodafone K3520 HUAWEI E176 Chile Cricket UM185C HUAWEI E180 Cricket A600 HUAWEI EC170 BT T-Mobile UMG181 EC168C_Reli USBConne HUAWEI AT&T ance ct mercury EC168C_Tat HUAWEI AT&T GI0322 MD-@ HUAWEI Sprint USB 598 HSUPA HUAWEI E160E Sprint U300...
  • Page 112 2. We will keep updating the firmware to support the new 3G modem cards. If you find that our Router can not support your 3G modem card, please visit our official website www.tenda.cn to download new firmware. 3. Huawei EC226、EC122、E176G, Viton E1916，ZTE MU351 and GXZG LKT828 are added in V0.5.
  • Page 113 SHENZHEN TENDA TECHNOLOGY CO., LTD www.tenda.cn...

Table of Contents