Tenda Portable 3G Wireless Router User Manual page 97

Router to default settings.
3. The computer connected with the Router
shows IP address conflict. What can I do?
Check if there are other DHCP servers in the LAN. If there
are, please disable them.
The default IP address of the Router is 192.168.0.1, please
make sure the address is not occupied by other devices. If
there are two computers with the same IP addresses, please
modify one.
4. My computer can not log in equipment; can
not access the internet, and a yellow triangle
with exclamation point symbols shows, how to
deal with?
This problem is due to your network card is not assigned
the IP address. If set your computer to automatically obtain
IP, please ensure that the source of the router's DHCP is
turned on. DHCP can automatically assign an IP address to
your computer. If there is no DHCP, please set a static IP
address and fill in gateways and DNS, otherwise you can not
access Internet.
5. I can not use E-mail and access the
Internet. What can I do?
It happens in ADSL connection and Dynamic IP users. And
you need modify the default MTU value (1492). Please in the
"WAN Setting" modify the MTU value with the recommended
150Mbps Portable 3G Wireless Router User Guide
95