Wps Settings - Tenda Portable 3G Wireless Router User Manual

packet is bigger than the threshold setting. The default
size is 2346 bytes. It is recommended not to modify this
value.

RTS Threshold: RTS is short for "Request to Send".
When the packet size exceeds this threshold, enable
CTS/RTS to reduce collision possibility. For the long-
distance clients to access in interference involved
environment, set a relatively smaller RTS value. It is
recommended not to modify the default value in SOHO
environment; otherwise it will affect AP performance.

TX Power: Set the output power of wireless radio. The
default value is 100.

WMM Capable: It will enhance the data transfer
performance of multimedia data when they're being
transferred over wireless network. It is recommended to
enable it if you are not familiar with WMM.

APSD Capable: It is used for auto power saving
service. The default is disabled.

6.4 WPS Settings

WPS (Wi-Fi Protected Setting) is an easy and quick way to
establish the encrypted connection between the wireless
network clients and the device. Users only need to enter PIN
code or press WPS button on the side panel to configure it
.In the "WLAN settings" menu, click "WPS settings" to enter
150Mbps Portable 3G Wireless Router User Guide
51