Tenda Portable 3G Wireless Router User Manual page 54

the configuration interface.

WPS Settings：To enable or disable WPS function. The
default is "disable".

WPS mode：Provide two simple WPS ways: PBC (Push-
Button Configuration) and PIN code.

PBC ： Select the PBC and click "save" or press the
WPS /RESET button on the back panel of the device for
about one second, at the same time enable client's
WPS/PBC to establish connection.

Operation process: Press the button for about one
second and WPS indicator will be flashing for 2 minutes,
which means the WPS is enabled. During the flashing
time, you can enable the WPS/PBC of the wireless client
for them to negotiate. Two minutes later, the WPS
indicator will be off, which means the WPS connection is
completed. Repeat the above steps to add more clients.
150Mbps Portable 3G Wireless Router User Guide
52