Sample Print B; [Print Condition]; Preset Count; Print Speed - TEC B-450 SERIES User Manual

6. DIAG. TEST OPERATION
Sample Print A

[Print Condition]

• Preset count

• Print speed

• Sensor

• Supply length

• Issuing mode

1) Maintenance Counter
# Item
(1) Total paper distance
covered
(2) Paper distance
covered
(3) Print distance
(4) Cut count
(5) Ribbon motor drive
time
(6) RS-232C hardware
error count
System error count
(7)
Momentary power
(8)
failure count
NOTES: 1. Item from (2) through (8) are initialized to "0" after RAM clear.
2. If the distance is 8.2 m or less (TS model)/4.1 m (HS model) or less, it is rounded down
and no data is added to the memory at power off. If the distance is less than 0.5 km,
"0.0 km" is printed.
3. If the count is 31 counts or less, it is rounded down and no data is added to the memory
at power off.
4. If the driving time is 32 sec. or less, it is rounded down and no data is added to the
memory at power off.
5. When a sent command results in an error, the same number as the data capacity of
the command is counted by byte.
: 1
: 2"/sec.
: No sensor
: 76 mm (TS model)

105 mm (HS model)

: Batch printing

Counted when the feed motor drives to feed, print
and issue the paper. (Counted also during back
feed.) [See NOTE 2].
Counted while printing. (Feeding and issuing
paper, are not counted.) [See NOTE 2.]
Counts every cut. [See NOTE 3.]
Counted when the Ribbon motor is driven to feed,
print, etc. [See NOTE 4.]
Counted when a parity, overrun or framing error
occurs. [See NOTE5.]
Counted when a zero-dividing error occurs or
undefined command is retrieved.
Counted when a momentary power failure occurs.
TL FEED 0.0km
(1)
FEED 0.0km
(2)
PRINT 0.0km
(3)
CUT 64
(4)
RIBBON 0h
(5)
232C ERR 255
(6)
SYS ERR 0
(7)
PW FAIL 0
(8)
PRINT SPEED
(9)
[PC] +1.0%
[KEY] +0.0%
X ADJ. +0.0mm
(10)
RIBN ADJ. [PC] +0
(11)
FONT [PC1254] [0]
(12)
SPEED [9600]
(13)
CONTROL [XON/XOFF]
(14)
CODE [AUTO]
(15)
THRESHOLD R 1.0V
(16)
KANJI [TYPE1]
(17)
STACKER [OFF]
(18)
GAIJI BLK [15]
(33)
RBN TYP [00]
(35)
Count Condition
6-4
EO18-33003A
(Revision Date: Jan. 22, 2001)
6.2 SELF TEST MODE
[PC]
FEED +0.0mm
CUT +0.0mm
BACK +0.0mm
TONE (T) +0step
TONE (D) +0step
[KEY]
FEED +0.0mm
CUT +0.0mm
BACK +0.0mm
TONE (T) +0.0mm
TONE (D) +0step
+0 [KEY] +0 +0
[¥]
PARITY [EVEN]
STATUS [OFF]
T 0.7V
EURO CODE FFH
TT BLOCK [13]
PCSAV BLK [0]
Fig. 6-1
Range
0.0 to 3200.0 km
0.0 to 200.0 km
0.0 to 200.0 km
0 to 1000000 times
0 to 2000 hours
0 to 255 hours
0 to 15 times
0 to 15 times
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(34)