Removing And Inserting The Battery Pack; Charging Your Handset - Avaya 6120 User Manual

Battery packs

Removing and inserting the battery pack

To remove a battery pack
To insert a battery pack

Charging your handset

To charge a battery pack
108
1. Press down on the latch on the battery
pack at the back of the handset.
2. Pull the battery pack towards you.
The battery pack releases outward.
1. Slide the lip of the battery pack into the
handset cavity.
2. Push the top of the battery pack until it
snaps into place.
Do not force the battery pack into the
handset.
You must charge the battery pack before its
first use.
1. Press End to terminate any calls.
The handset can be off or in standby
state during charging.
2. Place the handset, face forward, into the
Desktop Charger.
An animated charge icon indicates that
charging is in progress.
3. Charge the battery pack.
If the handset is in standby mode, it
displays its extension number and
. It is fully operational and can
Charging
receive calls. If the handset is off, only
Charging is displayed and the handset
cannot receive calls.