Optional Parts; Replacement Cutters And Consumable Parts - Roland EGX-20 User Manual

6 Optional Parts

Replacement Cutters and Consumable Parts

The following replacement blades and consumable parts are available.
Replacement Cutters
 General-purpose (general-purpose cutters suitable for engraving acrylic and plastic plates)
• ZEC-A2013
• ZEC-A2025
• ZEC-A2051
• ZEC-A2076
 Flat cutter (blades having a wider tip than general-purpose cutters)
• ZEC-A2105
• ZEC-A2190
• ZEC-A2230
• ZEC-A2320
 Quarter-round types (having a larger tip pocket than general-purpose cutters, and suited to engraving
soft material at high speed)
• ZEC-A2013-QR
• ZEC-A2025-QR
Adhesive Sheet
• AS-10
Replacement Parts
• ZM-12
• ZS-20
42 6 Optional Parts
(Blade width)
0.127 mm
0.254 mm (* This is the originally included blade.)
0.508 mm
0.762 mm
(Blade width)
1.52 mm
1.91 mm
2.29 mm
3.175 mm
(Blade width)
0.13 mm
0.25 mm
10 sheets
Spindle-motor unit (with a belt and a pulley)
* As a general guide, we recommend replacing this after
every 1,000 hours.
Spindle unit