11. Reinstall the two screws and tighten.
12. Close the liftgate.
License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding the
license plate lamp lens.
2. Pull the lens away from the lamp assembly.
3. Pull the old bulb straight out from the
bulb socket.
4. Install the new bulb.
5. Replace the lamp assembly lens and tighten
the screws.
Replacement Bulbs
Exterior Lamp
License Plate Lamp
Taillamps
For replacement bulbs not listed here, contact
your dealer.
Bulb Number
W5W
3157
439