Chevrolet TrailBlazer 2007 Owner's Manual page 225

Hide thumbs Also See for TrailBlazer 2007:
Table of Contents

Advertisement

SERVICE TIRE MONITOR
This message displays if a part on the Tire
Pressure Monitor (TPM) system is not working
properly. If you drive your vehicle while any of the
four sensors are missing or inoperable, the
warning comes on in about 20 minutes. A sensor
would be missing, for example, if you put
different wheels on your vehicle without
transferring the sensors. If the warning comes on
and stays on, there may be a problem with the
TPM. See your dealer.
STABILITRAK ACTIVE
This message displays anytime the StabiliTrak
system activates to maintain vehicle stability.
Any combination of engine speed management,
brake traction control, and stability control displays
this message.
STABILITRAK NOT READY
This message may display if driving conditions
®
delay StabiliTrak
system initialization. This
is normal. Once the system initializes, this
message will no longer be displayed on the DIC.
STABILITRAK OFF
This message displays when you press the
®
StabiliTrak
button for more than five seconds or
when stability control has been automatically
disabled. The StabiliTrak
transmission shift handle. To limit wheel spin and
realize the full benefits of the stability enhancement
system, you should normally leave StabiliTrak
However, you should turn StabiliTrak
vehicle gets stuck in sand, mud, ice, or snow and
you want to rock your vehicle to attempt to free it, or
if you are driving in extreme off-road conditions and
require more wheel spin. See If Your Vehicle is
Stuck in Sand, Mud, Ice, or Snow on page 348. To
®
turn the StabiliTrak
®
StabiliTrak
button again.
There are several conditions that can cause this
message to appear.
The message may display if the brake system
warning light is on. See Brake System
Warning Light on page 204.
The message displays if the vehicle is shifted
into 4LO.
The message turns off as soon as the conditions
that caused the message to be displayed are
no longer present.
®
button is located on the
®
off if your
®
system back on, press the
®
on.
225

Advertisement

Table of Contents
loading

Table of Contents