SOYO SY-7ISA User Manual page 99

Socket 370 celeron processor supported fw82815e agp/pci/cnr 66/100/133 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-7ISA:

Table of Contents

Sigmatel Audio Drivers installation

SynthCore Lite Application for Windows NT 4.0

The CD contains a SynthCore Lite application program, that the Quick

Start Guide does not describe. It can be installed by running StacGold.exe

in the D:\drive-all\sigmatel\StacGold directory. (Were D is your CD-ROM

drive letter).

Note that the NT4 installation requires a manual step at the end of the

installation. This step apllies to NT4 only. (NT4 Service Pack 4 has to be

installed, Service Pack 4 includes DirectSound 3)

1) After you run the normal installer, DO NOT reboot your system yet.

2) Go to Start > Settings > Control Panel > Multi Media

3) Select the "Devices" tab

4) Select the "Add" Button

5) Select "Unlisted or Undated Driver"

6) Browse to c:\Program Files\Staccato\SynthCore Lite\oemsetup.inf and

select this file.

7) Now look under the MIDI Devices tab, you should see the Staccato

MIDI driver.

8) Reboot your machine.

This finishes the installation process.

SY-7ISA

Table of Contents