Table of Contents
Advertisement
Hardware Installation
2.
Infrared (IR1)
Plug the 5-pin infrared device cable to the IR1 header. This will enable the
infrared transfer function. This Motherboard meets both the ASKIR and
HPSIR specifications.
Please install according to the following pin assignment:
Serial Infrared (IR1) Connector
3.
CD Line-in
This Motherboard provides two CD-Line in connectors. Please connect the
4-pin audio cable from your CD-ROM drive.
Please install according to the following pin assignment:
IR1 Pin Assignment
1 2 3 4 5
VCC
IRRX
CDIN1(CD Line-in)
Pin Assigment
1
2
GND
Right
GND
35
IRTX
GND
3
4
Left
SY-7ISA
Advertisement
Table of Contents
