Table of Contents
Advertisement
Hardware Installation
3.
Universal Serial Bus USB1/USB2
This Motherboard provides two USB ports for your additional devices.
Plug the USB device jack into the available USB connector USB1 or
USB2.
-
Standard device drivers come with the Win98 for commonly used
USB devices.
-
With Win95, use the flow UHCI specifications.
4.
Onboard Serial Port COM1
External peripherals that use serial transmission scheme include:
-
serial mouse,
-
and modem.
Plug the serial device cables directly into the COM1 9-pin male connector
located at the rear panel of the Motherboard.
5.
VGA monitor connector
Plug the monitor cable into the 15-pin female VGA connector located at
the real panel of the motherboard.
6.
Onboard Joystick port/audio
This Motherboard provides Joystick port and audio.
-
Attach the joystick cable to the 15-pin JOYSTICK port at the rear
panel of you motherboard.
32
SY-7ISA
Advertisement
Table of Contents
