Table of Contents
Advertisement
Intel 815 VGA Drivers Installation
10. Click on the adapter (e.g., VGA) that the Intel Win2K driver is
replacing.
11. Click on the Driver tab.
12. Click the Update Driver... button.
13. The Upgrade Device Driver Wizard window should now open.
14. Click the Next button.
15. Select the following option: "Display a list of the known drivers for
this device so that I can choose a specific driver".
16. Click the Have Disk button.
17. Click on "Browse" and go to the directory where the files were
unzipped. Go to the Win2K directory. If the English version of the
driver is to be installed, select the
If another language is
select the INF file of the desired language.
18. Proceed according to the remaining prompts. Close all windows and
reboot in order to use the new driver. See "Verifying the Installation
of the Software" below to confirm that the proper driver is being
used.
VERIFYING THE INSTALLATION OF THE SOFTWARE
1. From the Microsoft Windows 2000 desktop, click on "My Computer",
then "Control Panel", and then "System".
2. You should be in the System Properties window. Click on the
Hardware tab and hit the Device Manager button. From here, go
down to "Display Adapter" and click.
3. The installed display adapter should be Intel Corporation 815
Graphics Controller Hub.
i81xnt5.INF file and press OK.
desired, select the INF folder, and the
97
SY-7ISA
Advertisement
Table of Contents
