HP Vectra VE 5/series 2 User Manual page 90

Configure/View Interface Settings Menu
We recommend that these settings are not changed.
Configuration
SCSI Channel Interface Definitions
Interface SCSI ID . . . . . . . . . . 7
SCSI Parity Checking
Additional Options
SCSI Device Configuration . . . . . . Press <Enter>
Advanced Configuration Options
<F6> - Reset to Interface Defaults
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
SCSI Channel Interface Definitions:
• Interface SCSI ID
Changes the interface SCSI ID from its default value of 7 (which has the highest priority
on the SCSI bus).
• SCSI Parity Checking
Enable or disable host adapter SCSI parity checking. You should disable SCSI Parity
Checking if any attached SCSI devices do not support SCSI parity (most currently
available SCSI devices do support SCSI parity).
Additional Options:
• SCSI Device Configuration
Press [ENTER] to display the SCSI Device Configuration menu.
• Advanced Configuration Options
Press [ENTER] to view the Advanced Configuration Options menu.
SCSISelect™ Utility v1.00
. . . . . . . . Enabled
. . . Press <Enter>