HP Vectra VE 5/series 2 User Manual page 87

Security Features
Some of the Security Features options will not be available if you have selected Windows 95
... Installed.
Security Features
System Administrator Password . . Not Set
Start with Keyboard Locked
Flexible Disk Drives
Writing on Flexible Disks . . . . Allowed/Not Allowed
Plug and Play Device Management . Full/None/Required for Boot
Using the Start-Up Center
The Start-Up Center lets you choose which system devices the computer can start (boot) from.
Some options will not be available if you selected Operating System ... Microsoft Windows
NT, OS/2, or Other.
Start-Up Center
Control
Start from Flexible Disk
Start from Hard Disk
Bootable HDD Interface
Start from Network
Priority Selected
Priority of available devices . . 1
The Priority Selected items are for information only and cannot be changed.
Parallel Ports and Serial Ports
Use these options to select a combination of I/O address and IRQ channel for the parallel port
and for the serial ports.
To configure a parallel port mode, highlight Parallel Port Mode and select Centronics, EPP,
or ECP.
Parallel Port . . . . . . . . . . . Parallel 1 (378h, IRQ7)
Parallel Port Mode
Serial Port A . . . . . . . . . . . Serial 1/2/3/4/Off
Serial Port B . . . . . . . . . . . Serial 1/2/3/4/Off
. . . Enabled/Disabled
. . . . . . Enabled/Disabled
. . . Enabled/Disabled
. . . . . Enabled/Disabled
. . . . IDE/SCSI
. . . . . . Enabled/Disabled
. . 2
. . 3
. . 4
. . . . . . . . Centronics/EPP/ECP
Flexible Drive
IDE Hard Drive
SCSI Hard Disk
Network