HP Vectra VE 5/series 2 User Manual page 85

User Preferences
User Password . . . . . . . . . . Not Set/Set
Keyboard Lock Timer . . . . . . . Disabled/Enabled
Screen Blanking . . . . . . . . . Enabled/Disabled
Key Autorepeat Speed
Delay before Autorepeat . . . . . 0.25 to 1 second
Power-on Numlock State
Keyboard Power On . . . . . . . . Disabled/Enabled
Memory Test . . . . . . . . . . . Disabled/Enabled
To speed up the computer's power-on self-test, highlight Memory Test and select Disabled
Viewing Processor Information
These lines provide information about the processor installed in your computer (and cannot be
changed).
Processor . . . . . . . . . . . . . . Pentium Pro
Computer Speed
Coprocessor . . . . . . . . . . . . . Integrated
Viewing Memory Size
Check that Setup has detected the memory and configured the Memory Size fields correctly.
Check the TOTAL memory size and, if it is wrong, check that you have installed the memory
modules correctly.
Memory Size
Base, on System Board . . . . . . 640 KB
Base, on Accessory Board
Base, TOTAL . . . . . . . . . . . 640 KB
Reserved
Extended
TOTAL . . . . . . . . . . . . . . 14336 KB
Memory Hole Below 1 MB
Configuring IDE Devices
Most IDE devices (for example, hard disk drives and CD-ROM drives) are automatically
detected by the Setup program. If your IDE hard disk has more than 1023 cylinders, highlight
Translation Method and select:
• Automatic if you use MS-DOS, Windows NT, Windows 95 or OS/2
• Extended CHS if you use NetWare
• Standard CHS if you use UNIX or Banyan Vines.
. . . . . . 2 to 30 per second
. . . . . Not Set/Set
. . . . . . . . . . . 150 MHz
(1 MB = 1024 KB)
. . . . 0 KB
. . . . . . . . . . . . 384 KB
. . . . . . . . . . . . 13312 KB
. . . . . . Base = D400h, D800h
(13.0 MB)
(14.0 MB)