HP Vectra VE 5/series 2 User Manual page 12
Hewlett-packard personal computer user's guide
Hide thumbs
Also See for Vectra VE 5/series 2:
- User manual (102 pages) ,
- Technical reference manual (42 pages) ,
- Supplementary manual (29 pages)
Table of Contents
Advertisement
NOTE:
2
Connect the SCSI accessory to your PC's external SCSI connector with a shielded SCSI
cable. (Note that Ultra SCSI is automatically disabled when an external SCSI accessory is
connected.)
3
Make sure the SCSI accessory is terminated correctly—either internally or by a
terminating resistor (refer to the manual provided with the SCSI accessory).
4
Refer to the manual provided with the SCSI accessory to learn how to install any software
that may be necessary to use it.
You don't need to set a SCSI address for Plug and
Play SCSI devices (SCSI devices which support the
SCAM protocol).
Make sure the SCSI
accessory is terminated
Advertisement
Table of Contents
