Cisco DPC2607 User Manual page 49

Normal Operations
The following chart illustrates the appearance of the LED status indicators on the
front panel of the cable modem during normal operations.
Front Panel LED Status Indicators During Normal Operations
Front Panel
Indicator
1 POWER
2 DS1
3 DS2
4 DS3
5 US
6 ONLINE
7 1000
8 10/100
9 USB
10 TEL1
11 TEL2
4023667 Rev C
Normal Operations
On
On
On– When wideband operation is enabled on that channel
Off – When wideband operation is not available on that channel
On– When wideband operation is enabled on that channel
Off – When wideband operation is not available on that channel
On
On
On – When a device is connected to the GigE port and no data is being sent to or from the
modem
Blinks – When a GigE device is connected and data is being transferred between the
consumer premise equipment (CPE) and the cable modem
Off – When no device is connected to the GigE port
On – When a device is connected to the Ethernet port and no data is being sent to or from
the modem
Blinks – When an Ethernet device is connected and data is being transferred between the
CPE and the cable modem
Off – When no device is connected to the Ethernet port
On – When a device is connected to the USB port and no data is being sent to or from the
modem
Blinks – When a USB device is connected and data is being transferred between the CPE
and the cable modem
Off – When no device is connected to the USB port

On – When telephony service is enabled

Blinks – When line 1 is in use

On – When telephony service is enabled

Blinks – When line 2 is in use
Front Panel LED Status Indicator Functions
49