How Do I Connect Usb Network Devices - Cisco DPC2607 User Manual

How Do I Connect USB Network Devices?

Connecting USB Devices
You must connect your USB devices for use with your cable modem. Professional
installation may be available. Contact your local service provider for further
assistance.
The following diagram illustrates one of the various USB network connection
options that are available to you.
WARNING:
Hazardous electrical voltages can be present on any connected wiring. USB
wiring and connections must be properly insulated to prevent electrical shock.
Disconnect power from the cable modem before attempting to connect to any
device.
To avoid personal injury, follow these steps in the exact order shown.
CAUTION:
To prevent possible damage to the equipment, disconnect any other service
before connecting your cable modem to other devices.
Read the warnings and caution on this page. Then, follow the subsequent
installation procedures to help ensure proper cable modem operation when
connecting USB network devices.
Note: Verify that you have installed the USB drivers on your PC before continuing
with these instructions. See How Do I Install USB Drivers? (on page 23), for more
information on installing the USB drivers.
4023667 Rev C
How Do I Connect USB Network Devices?
33