Cisco DPC2607 User Manual page 42

Channel-bonded emta
Table of Contents

Advertisement

How Do I Install the Modem for Telephone Service?
4
Test your telephone service by lifting the receiver of each attached telephone to
verify that the dial tone can be heard and that you can make and receive
telephone calls. This process may take several minutes.
Notes:
The TEL 1 and TEL 2 LED status indicators on the front panel of the cable
modem illuminate when telephony service is enabled.
The TEL 1 or the TEL 2 LED status indicators on the front panel of the cable
modem blink when the attached device is "off the hook."
42
4023667 Rev C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Epc2607

Table of Contents