Step 4: Connecting The Audio Cords - Sony DVP-NC675P Service Manual

DVP-NC675P
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y/P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images. If your TV accepts progressive
(480p) format signals, you must use this connection and set NORMAL/PROGRESSIVE switch
to PROGRESSIVE (page 67). The PROGRESSIVE indicator lights up when the player outputs
progressive signals.
Green
Blue
Red
When connecting to a wide screen TV
Depending on the disc, the image of some discs may not fit your TV screen. If you want to
change the aspect ratio, please refer to page 66.
Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a
clear image on the TV screen.
VCR
CD/DVD player
Connect
directly
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it
is recommended that you switches the connection to the standard definition output. If there are questions
regarding your Sony TV set's compatibility with this model 480p DVD player, please contact our customer
service center.
Connecting to your TV
A
This connection will use your TV's speakers for sound.
CD/DVD player
COMPONENT LINE OUT
VIDEO OUT
PCM/DTS/
Y P P VIDEO
DOLBY B R
DIGITAL
NORMAL
PROGRESSIVE
OPTICAL COAXIAL R-AUDIO-L
DIGITAL OUT LINE OUT S VIDEO OUT
(yellow)*
(white)
(red)
R-AUDIO-L
Audio/video
LINE OUT
cord (supplied)
to LINE OUT L/R (AUDIO)
l : Signal flow
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
Yellow (Video)
White (L)
Red (R)
/P )
B R
Green
Blue
Red
TV
19
c
(yellow)*
TV
(white)
(red)
to audio input
21
c

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
AV amplifier (receiver) with a digital input jack
having a Dolby Digital or DTS** decoder and 6
speakers
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
.
connection D
20
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
COMPONENT LINE OUT
VIDEO OUT
PCM/DTS/
DOLBY Y P B P R VIDEO
DIGITAL
NORMAL
PROGRESSIVE
OPTICAL COAXIAL R-AUDIO-L
DIGITAL OUT LINE OUT S VIDEO OUT
Optical digital cord
(not supplied)
Remove jack cap
PCM/DTS/ before connecting.
DOLBY
DIGITAL
OPTICAL COAXIAL
DIGITAL OUT
to DIGITAL OUT
(OPTICAL or COAXIAL)
Coaxial digital
cord (not supplied)
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
l: Signal flow
22
1-4
through .
A D
Connection Your setup
(page 21) Example
A
(page 22) Example
B
(page 23) Example
C
(page 24) Example
D
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
. If the amplifier
B-1
Stereo audio cord
(not supplied)
(white)
(red)
R-AUDIO-L
or or
LINE OUT
to LINE OUT L/R (AUDIO)
(white)
(red)
to audio input
Stereo amplifier (receiver)
MD deck/DAT deck
.
B-2