Step 5: Connecting The Power Cord; Step 6: Quick Setup - Sony DVP-NC675P Service Manual

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use .
C-2
CD/DVD player
COMPONENT LINE OUT
VIDEO OUT
PCM/DTS/
DOLBY Y P P R VIDEO
B
DIGITAL
NORMAL
PROGRESSIVE
OPTICAL COAXIAL R-AUDIO-L
DIGITAL OUT LINE OUT S VIDEO OUT
Stereo audio cord
Optical digital cord
(not supplied)
(not supplied)
Remove jack cap
before connecting.
PCM/DTS/
DOLBY
DIGITAL
or or
OPTICAL COAXIAL
DIGITAL OUT
to DIGITAL OUT
(OPTICAL or COAXIAL)
Coaxial digital cord
(not supplied)
(white)
to coaxial or optical digital input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (R)
Rear (L)
Subwoofer Center
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.

Step 5: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.

Step 6: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
5
6
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
"Press [ENTER] to run QUICK SETUP."
appears at the bottom of the screen. If this
message does not appear, select 7
"QUICK" under "SETUP" in the Control
Menu to run Quick Setup (page 65).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
C-1 . If your amplifier
(white)
(red)
R-AUDIO-L
LINE OUT
to LINE OUT L/R (AUDIO)
(red)
to audio input
[Speakers]
Front (L) Front (R)
Rear (mono)
23
c
LANGUAGE SETUP
OSD: ENGLISH
MENU: ENGLISH
FRENCH
AUDIO:
SPANISH
SUBTITLE:
PORTUGUESE
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER: 4:3 LETTER BOX
4:3 PAN SCAN
BACKGROUND:
BLACK LEVEL: 16:9
BLACK LEVEL : OFF
(COMPONENT OUT)
MODE : AUTO
(PROGRESSIVE)
Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 66)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 66)
25
c
Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital, or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver).
CD/DVD player
COMPONENT LINE OUT
VIDEO OUT
PCM/DTS/
DOLBY Y P B P R VIDEO
DIGITAL
NORMAL
PROGRESSIVE
OPTICAL COAXIAL
R-AUDIO-L
DIGITAL OUT LINE OUT S VIDEO OUT
to DIGITAL OUT
(OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
to optical digital
input
[Speakers]
Front (L)
Center
Front (R)
l: Signal flow
z Hint
when connecting to 7 or
Use connection D
more speakers (6.1ch or more).
Notes
• After you have completed the connection, be sure to
set "DOLBY DIGITAL" to "DOLBY DIGITAL"
and "DTS" to "ON" in Quick Setup (page 25).
24
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 ( through ).
D
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "LINE OUTPUT L/R
(AUDIO)." Quick Setup is finished and
connections are complete.
D
B-2 C-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 ( through ).
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
DOLBY DIGITAL
26
1-5
DVP-NC675P
PCM/DTS/
DOLBY
DIGITAL
OPTICAL COAXIAL
DIGITAL OUT
to DIGITAL OUT
(COAXIAL)
Coaxial digital cord
or
(not supplied)
to Coaxial digital
input
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L) Subwoofer
Rear (R)
• In order to listen to DTS sound tracks, you must
use these connections. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 25).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48 kHz/96 kHz PCM" in "AUDIO SETUP" to
"96 kHz/24 bit" (page 69).
B-2 C-2
• D-PCM (page 69)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL: D-PCM
DTS: OFF
48kHz/96kHz PCM: OFF
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 ( through ).
B D
B-2 C-2
• OFF (page 69)
D
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
OFF
ON
D-PCM
D-PCM
ON
ON