Menu; Menu Configurations; Opening The Menu; Opening The Sub Menu - Kenwood TS-990S Instruction Manual

3 MENU

MENU CONFIGURATIONS

In the Menu screen, you can configure and edit various
functions of this transceiver as well as change the
operating environment.
This transceiver's Menu contains common functions and
configurations, along with 5 sub menus categorized for
those sub menu groups.

OPENING THE MENU

1 Press [MENU] to open the Menu screen.
Displays the acquired IP address.)
Displays the operating environment (CONFIG A or CONFIG B).
The menu group number and the menu items appear.
2 Press [ ] (F2) or [
group.
3 Press [SELECT] (F4) or [SUB>] to display the menu
items of the selected group.
4 Press [ ] (F2) or [
menu item.
5 Press [SELECT] (F4) or [SUB>] to allow editing of the
parameter box.
The parameter box becomes active, and the parameter can
be changed.
6 Press [–] (F4) or [+] (F5) to select a parameter.
The parameter for the menu item varies.
7 Press [ ] (F1) to revert to the previous screen.
The selected parameter has determined.
8 Press [MENU] to end.
Contents Index

OPENING THE SUB MENU

1 Press [MENU] to open the Menu screen.
2 Press the function key for the key guide on the right

COMMON OPERATION IN THE MENU SCREEN

• Pressing [MENU TOP] (F) reverts to the Menu screen.
• Press [
• Each menu can be selected with the operation below.
• Rotate the MULTI/CH control.
• Press [
• The parameter for the menu item with an editable
• Rotate the MULTI/CH control.
• Press [UP] or [DOWN].
• Press [–] (F4) or [+] (F5).
• Press [
] (F3) to select a
• Press the [UP] or [DOWN] (microphone).
• Pressing and holding [(RESET)] (F1) reverts the
] (F3) to select a

CLOSING THE MENU

If you finish the configuration or edit in the Menu screen,
or if you wish to finish the operation during the menu item
configuration, follow the procedure below. The Menu
screen closes, the normal screen reappears.
1 Press [MENU] or [ESC].
Note:
◆ All configurations in the Menu screen can be reset to the default
◆ Menu contents, such as the menu item name and default
◆ During configuration of the screen saver or the power-on message,
side of the main screen.
Following are the sub menu that appears on the screen.
Sub Menu Key Guide
A menu which allows you to reset the
Reset RESET
transceiver to its default state.
A menu which allows you to configure
Clock CLOCK
the internal clocks.
A menu which allows you to configure
LAN LAN
the connections to your LAN.
A menu which allows you to configure
AUTO MODE AUTO MODE
the upper and lower limit frequencies.
An advanced menu that allows detailed
Advanced ADV. advanced configurations including
connections to external devices.
A key which activates and displays
SWL SWL "Short Wave Listener" style horizontal
dials with a vertical meter.
USB Flash A menu which allows you to manage a
USB DRIVE
Drive USB flash drive.
] (F2) or [
through the menu groups.
] (F2) or [
Press [UP] or [DOWN].
parameter box can be selected as follows:
] or [
parameters to their defaults.
parameters. {page 16-4}
parameters, are subject to change due to design change and
innovations.
pressing [MENU] does not close the Menu screen.
Summary of Changes
] (F3) to scroll
] (F3).
].
3-1