Connecting Power - Planar PS4200 User Manual

16 Setting Up the Display

Connecting Power

1. Plug one end of the power cord into the AC IN jack on the display and the other end into
an appropriate power outlet (if the outlet is switched, turn on the switch).
2. Press the power switch to turn on the main power. The display will enter standby mode
and the power indicator will light up amber.
Notes:
• The supplied power cord is suitable for use with 110-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which
appears damaged or frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power
boards.
• There are no user serviceable parts in this display. Never unscrew or remove any covers.
There are dangerous voltages inside the display. Turn off the power and unplug the power
cord if you intend to move the display.
2
1