Connecting Audio/Video Signals; Connecting The Vga Input - Planar PS4200 User Manual

10 Setting Up the Display

Connecting Audio/Video Signals

Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want to
use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull the
connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.

Connecting the VGA Input

1. Connect the VGA IN jack on the display to the VGA output jack on a computer using a Mini
D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the AUDIO IN jack on the display using a
suitable audio cable.
3. If a second display is used, connect the VGA OUT jack on the first display to the VGA IN
jack on the second display using a Mini D-Sub (15-pin) cable. This relays the VGA input
signal from the first display to the second one.
4. To view images from this input, press the
Second display
First display
*The audio cable is not supplied and should be purchased separately.
Audio cable
button on the remote control.
VGA
Mini D-Sub (15-pin)
cable
Mini D-Sub (15-pin)
cable
Computer