Connecting Power - Planar Bobcat X SN-4045-WX User Manual

2.4 Connecting Power

Bobcat X accepts 110-120 VAC and 200-240 VAC with no manual switching. It is the responsibility of the
installer to provide the power supply cord certified for use in the destination country.
Plug the power cord into the receptacle on the rear of the
Bobcat X. Plug the other end into a good source of AC
power.
When ready, turn on the power switch.
15
Normal operation
It is normal to leave the power connected and the power
switch on all the time and turn the backlight on and off as
desired.
For power receptacle dimensions, see see "Connector
Locations and Diagrams" on page 131.
Power receptacle and power switch location