Connecting Audio/Video Signals; Connecting The Vga Input - Planar PY4200 User Manual

Connecting Audio/Video Signals

Pay attention to the following when making connections:
• Before making connections, please turn off all devices.
• Familiarize yourself with the connectors and jacks on the devices you want to connect and
the display. Be aware that incorrect connections may adversely affect picture quality.
• Do not pull cables out of jacks by grasping the cable itself, as you may damage the cable.
Always grasp and pull the plug at the end of the cable.
• Once connected, please ensure that all plugs are fully inserted and firmly seated.

Connecting the VGA Input

1. Connect the VGA-IN jack on the display to the VGA output jack on a computer using a
Mini D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the LINE-IN jack on the display using a
suitable audio cable.
3. If a second display is used, connect the VGA-OUT jack on the first display to the VGA-IN
jack on the second display using a Mini D-Sub (15-pin) cable. This relays the VGA input
signal from the first display to the second one.
4. To view video image from this input, press the
Second display
First display
*The audio cable is not supplied and should be purchased separately.
Mini D-Sub (15-pin)
cable
Mini D-Sub (15-pin)
cable
Audio cable
Setting Up the Display
button on the remote control.
VGA
Computer
13